- Descripción
- Specificación
- Dimensions
- Enviar Consulta
Series: C - Capstans
Planetary capstans
Equipped with a cast iron capstan head mounted on a heavy duty planetary gearbox. Its drive is set in a watertight tube frame providing extra protection. Pneumatic drives are also available - on request. Capstans up to 15 tons can be offered upon request.
Wormgear capstans
Provided with self-braking worm gear drives powered by electric, hydraulic or pneumatic motors (on-deck or below-deck types are available). An on-deck drive is equipped with a waterproof motor for intermittent use. A below-deck drive is equipped with a dripwater-proof motor and a mounting plate with an extra self-aligning bearing for high static loads. Pneumatic drives are also available - on request.
Standard features
- Vertical cast iron warping head according to ISO 6482
- Heavy duty wormgear or planetary gearbox
- Three layer 2-component conservation according ISO 12944 category C4-High, colour RAL 5010
- IP 54 braked motor 400 VAC / 3-phases / 50 Hz for planetary capstans
- Orbit or radial piston type hydraulic motor
- IP 56 TENV cast iron 400 V AC / 3-phase / 50 Hz non-braked motor for on-deck wormgear capstans
- Single speed and one direction only (electric capstans only)
- IP 54 400 V AC / 3 phases / 50 Hz non-braked motor for under-deck wormgear capstans
General options for winches
- Brida divisora de tambor
- Tambor ranurado
- Cubiertas de tambor
- Rodillo de presión
- Final de carrera
- Encoder + final de carrera
- Embraque manual
- Embrague de fricción
- Interruptor de control de tensión del cable
- Final de carrera neumático
- Freno de banda manual
- Freno de banda hidráulico
- Control remoto colgante
- Válvula de control neumática
- Engranaje de enrollamiento
- Anclaje de cable adicional
- Anillo de rozamiento
- Biela manual de emergencja (en motor eléctrico)
WLL 1st layer [kg]: | 1300 kg |
Speed [m/min]: | 13.0 m/min |
Mass: | 130 kg |
Rope diameter: | 30 mm |
Motor power: | 5.50 kW |
Voltage main supply: | 400V AC 3 phase |
Neck diameter: | 195 mm |
*For more storage, higher / lower speed or change any parameter, please contact with us
Dimension D1: | 195 mm |
Dimension D2: | 350 mm |
Dimension D3: | 450 mm |
Dimension D4: | 290 mm |
Dimension H1: | 15.0 mm |
Dimension H2: | 180 mm |
Dimension H3: | 415 mm |
Dimension H4: | 245.0 mm |
Dimension H5: | 10.0 mm |
Hole diameter: | 18.0 mm |
Number of holes: | 8 |