- Descripción
- Specificación
- Enviar Consulta
Series: MR FL - manriding winches
These winches are dedicated personnel lifting winches supplied with full material traceability. They have passed EC testing for these applications, - both winches and their technical files are in compliance with the requirements of the EC Machinery Directives.
MR 30 FL winches are specially designed for personnel lifting in which a safety harness or a boatswain's chair is used on fixed installations with a total WLL of 150 kg. MR 30 FGL winches have passed EC testing for these applications.
Both winches can be supplied with a Lloyds Register of Shipping (LRS), ABS or DNV Design Appraisal Certificate.
MR 50 FL and MR 60 FL are constructed to be used with assemblies using a platform, basket, carrier (MR 50 FL - with a total WLL of 500 kg and MR 60 FL - 1000 kg).
Standard features
- Orbit hydraulic motor
- Helical shaft mounted gearbox, life lubricated with synthetic oil
- Limit switch
- Pneumatic gearmotor
- Slack wire switch
- Two drum supports
- Caliper primary brake 180% of WLL
- Helical grooved steel drum
- Overload protection device
- Air service unit (pneumatic models only)
- Main air emergency stop valve
- UK HSE compliance
- Full material traceability (3.1 - EN 10204) on load-bearing parts
- Local proportional control with biased control valve (pneumatic models only)
- Local proportional control with biased control valve (MR 30 FLP/FLV only)
- Mufflers (on MR 30), 50 and 60 FLG
- Drum guard
- Automatic band brake as secondary drum acting brake 180% of WLL
- Prepared for emergency lowering system
- FEM / ISO class: T4-L3-M5
- Three layer 2-component conservation according ISO 12944 category C4-High, colour RAL 1023
- Operating conditions –20°C to 50°C
General options for winches
- Brida divisora de tambor
- Tambor ranurado
- Cubiertas de tambor
- Rodillo de presión
- Final de carrera
- Encoder + final de carrera
- Embraque manual
- Embrague de fricción
- Interruptor de control de tensión del cable
- Final de carrera neumático
- Freno de banda manual
- Freno de banda hidráulico
- Control remoto colgante
- Válvula de control neumática
- Engranaje de enrollamiento
- Anclaje de cable adicional
- Anillo de rozamiento
- Biela manual de emergencja (en motor eléctrico)
WLL 1st layer [kg]: | 1270 kg |
WLL lifting top layer: | 1000 kg |
Speed at top layer: | 30.0 m/min |
Number of layers: | 4 |
Drum capacity top layer: | 135 m |
Pressure drop: | 6.5 bar |
Flow: | 120 l/min |
Rope diameter: | 13 mm |
*For more storage, higher / lower speed or change any parameter, please contact with us